Vitek VT-1769 W, Инструкция по эксплуатации

Страница: 3 / 40

3
ENGLISH
AIR HUMIDIFIER
Insufficient room humidity negatively affects
a human & pets health as well as plants and
furniture condition.
The recommended comfortable room humidity
level is from 40% to 60%.
VT-1769 air humidifier enables to improve the air
quality in the room.
Description
1. Display
2. Control panel
3. Body
4. Process chamber with sprayer
5. Illumination
6. Water tank lid
7. Cartridge filter
8. Water tank
9. Tank carrying handle
10. Steam release opening
11. Nozzle
12. Remote control
13. Cleaning brush for sprayer
Control panel buttons (2)
14. On/Off button «SWITCH ON»
15. On/Off
button of ionization mode
«IONIZATION»
16. Mist release intensity setting button «MAX/
MIN»
17. Relative humidity in the room setting button
«HUMUDIFICATION»
18. Timer setting button «TIMER»
Remote control (12)
19. On/Off button of the unit
20. On/Off button of the ionization mode
21. Timer setting button
22. Relative humidity in the room setting button
23. Mist release intensity setting button
Attention!
For additional protection it is reasonable to install
a residual current device (RCD) with nominal
operation current not exceeding 30 mA. To install
an RCD, contact a specialist.
SAFETY MEASURES
Before using the unit, read this instruction
manual carefully. Keep this manual for future
reference.
Use the unit according to its intended purpose
only, as it is stated in this user manual.
Mishandling the unit can lead to its breakage
and cause harm to the user or damage to his/her
property.
• Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
• To avoid fire, do not use adapters for connect-
ing the unit to the mains.
•
Place the unit on a flat, moisture-resistant sur-
face. The distance to the walls, other furniture
and interior objects should be at least 30 cm.
•
Do not place the unit on carpet surfaces with
high pile.
• Do not place the humidifier in places exposed
to direct sunlight, high temperatures, near
computers or other sensitive electronic appli-
ances.
•
Do not use the unit outdoors.
•
Use only the removable parts supplied with
the unit.
• Do not operate the unit without water; discon-
nect the unit from the power supply when the
water tank becomes empty.
• Do not use soda or dirty water or any perfume
additives.
•
The water temperature should not exceed
40°С.
•
Do not switch the unit on if the filter and water
tank are not installed.
• Unplug the unit from the mains before remov-
ing the water tank or inlet filter grid.
•
Do not cover the unit.
•
Do not cover the unit openings and avoid get-
ting of foreign objects inside them.
•
Do not immerse the unit body, the power plug
or the power cord into water or other liquids.
• Do not move or tilt the unit during the opera-
tion and do not remove the water tank. Always
unplug the unit and pour out water from the
water tank and process chamber before
cleaning or if you do not use the unit.
•
Before moving the unit to another place,
unplug it and pour out water from the water
tank and process chamber. When moving the
unit, hold it by the base with both hands.
•
Do not touch the power plug with wet hands.
• Clean the unit regularly.
VT-1769.indd 3 05.12.2013 10:54:54