Vitek VT-1609 Скачать руководство пользователя

Страница: 4 / 48

ENGLISH

Preparation for operation

• Unpack the unit.
• Before you connect the unit to the mains,

make sure that the voltage specified on
the unit corresponds to the voltage in your
home socket.

• Carefully wash all the removable parts,

which will contact with products, and dry
them.

Note: Be carefully while holding the
shredding sieve; its surface is very
sharp.

• Wash vegetables/fruits and cut them into

pieces, which will easily pass into the cov-
er throat of the unit.

• While extracting juice from stone fruits (for

instance cherry, peach etc.) remove pits
from the fruits.

Making juice

• Put the unit on the stable dry and flat sur-

face.

• Before assembling, make sure that the

unit is switched off and unplugged.

• Set the juice tank (5) on the motor unit (9).
• Set the shredding sieve (4) in the juice

tank (5), provided proper installation you
will hear a specific flick.

Note: - Do not use the shredding sieve if
it has any defects.

• Set the cover (3) on the juice tank (5).
• Set the juice container (8).
• Lift the clamp (7), and match it with the

groves on the cover (3).

• Put a container (11) or another vessel un-

der the pouring spout (6).

• Insert the plug into the socket.
• Switch on the juicer by setting the switch

(10) to the “I/low speed” position or to the
“II/high speed’ position.

Note:
- “1/low speed” - is used to extract juice

from soft vegetables/fruits (tomatoes,

pears, strawberry, oranges, plums,
grapes, pumpkin, onion, cucumbers
etc.).

- “2/high speed” - is used to extract

juice from hard vegetables/fruits (ar-
tichoke, carrot, apples, pepper, beet-
root, potatoes, pineapples, vegetable
marrows, celery, spinage, dill, kurrat
etc.).

- the unit will switch on only if all the re-

movable parts are installed properly
and the upper cover is fixed by the
clamp (7).

• Put the products only while the motor is

operating.

• Gradually put preliminary cut pieces of the

products into the throat (2) of the cover
(3) and slightly press them with the pusher
(1). Do not press strongly the pusher; it
can lead to worse quality of the juice or to
a stop of the shredding sieve rotation (4).

• Do not immerse your fingers or other ob-

jects into the throat (2) of the cover (3).

•

Periodically check the condition of the
shredding sieve (4) concerning blockage
of the filter, if necessary wash the shred-
ding sieve (4).

• Check the container (8), if it is full, switch

off the unit, take the plug out of the socket,
remove the container (8) and remove the
pressed skins.

• After using of the unit switch it off by set-

ting the switch (10) to the “0” position, wait
when the shredding sieve stops complete-
ly (4) and take the plug out of the socket.

• Dismantle and clean the unit each time af-

ter usage:

- Remove the pusher (1) from the throat (2).
- Pull the clamp (7).
- Remove the upper cover (3).
- Remove the juice tank (5) together with

the shredding sieve (4).