Vitek VT-1429, Инструкция по эксплуатации

Страница: 5 / 24

5
ENGLISH
–
When adding products to the bowl (12) make
sure that the attachments (6) or beaters (7)
contact with the products, in this way the mix-
ing is thorough.
–
Insert the power plug into the mains socket.
–
Switch the mixer on with the switch (2) set-
ting the attachment rotation speed from «1»
to «5» (see the table). To switch the maximal
rotation speed on during the mixer opera-
tion, press and hold the «TURBO» button (1).
–
Do not hinder rotation of the bowl (12) during
the unit operation.
–
After the unit operation is finished, set the
switch (2) to the position «0» and unplug the
unit.
–
Press and hold down the button (9), remove
the mixer (4) from the support (8).
–
Hold the attachments (6) or the beaters
(7) with one hand, press the «EJECT» hook
release button (3) with the other hand and
remove the hooks.
–
Press and hold down the button (11), lower
the support (8) and release the button (11)
(pic. 4).
–
Remove the spatula (13) and the bowl (12)
from the base (10).
Note: You can use the unit as a handheld mixer;
for this install the hooks (6) or beaters (7) and
use a suitable bowl.
RECOMMENDED OPERATION MODES
Product type
Recommended
product amount
Attachment
rotation
speed
Approximate
operation
time
Used attachments: beaters (5)
Beating egg whites 6 4-5 2-4 min.
Whipping cream 300 ml 1-5 4 min.
Mixing ingredients for dough 400 g 1 - 5 1.5 – 2 min
Beating butter 400 ml 4 - 5 1 min.
Mixing butter with flour (if necessary, you
can add some water for getting doughy
consistency)
150 g
1-2
1
4 min.
1 min.
Used attachments: dough hooks (6)
Kneading yeasted dough 350 g 1 - 5 2-3 min
Butter 400 ml 4 - 5 1 min.
Mixing butter with sugar 350 g 4-5 1 min.
Note: Recommended product amount, attachment rotation speed and operation time are given for
using the mixer bowl (12).
CLEANING AND CARE
–
Switch the unit off and unplug it.
–
Wash the hooks (6) or beaters (7), the
bowl (12) and the spatulas (13, 14) with
warm water and a neutral detergent, then
dry them.
–
Clean the mixer body (4) and base (10) with a
soft, slightly damp cloth, and then wipe it dry.
–
Do not immerse the mixer body (4), power
cord and plug into water or any other liquids.
–
Provide that no water or detergent gets inside
the support (8).
–
Use neutral detergents to remove dirt; do not
use metal brushes, abrasive detergents and
solvents.
STORAGE
–
Clean the unit.
–
Keep the unit out of reach of children and dis-
abled persons.
IM VT-1429.indd 5 25.07.2018 12:25:23