Figure 3:
Opened battery compartment with inserted batteries
The battery status for the activated device is visible on the battery icon at the bottom left of the screen. It is recommended
to change the batteries when the display shows no bars and the battery icon flashes. In measuring mode, the ECG
measuring unit is designed for between 9 to 13 hours of operation, depending on the type of batteries used.
ATTENTION: Dispose of used batteries according to the valid regulations of your country.
5.3 Clip
The device can be worn on the patient’s clothing with the clip. To fasten the device to clothing, push the clip in a loop of
clothing or on a belt.
Figure 4:
ECG measuring unit with clip
5.4 Electrodes and electrode cable
Make sure the ECG adhesive electrodes are applied carefully. A disturbance-free ECG is only guaranteed if the
electrodes are correctly positioned with good skin contact.
Adhesive electrodes are intended for one-time use only
Always observe the user instructions for the used electrodes
07657_3
file:///C:/Users/mike/Downloads/07657-3 (1)/07657_3.html
10 of 28
6/27/17, 1:41 PM
