Vitalograph alpha 6000, Инструкция по эксплуатации

Страница: 13 / 40

09060 Issue 1
13 Page of 40
EN
Alpha - Instructions for Use
on and in the main screen. If the device is not already connected,
click on the ‘Connect Device’ option in the menu.
Figure 5.a
3. Device Studio will search for assessments on the device (see Fig
5.a). Available assessments are shown on screen and may be
selected and printed and/or saved (see Fig 5.b).
Figure 5.b
4. Device Studio may also be used to print/save calibration verification
reports and to update device firmware.
5. When finished with Device Studio click on the ‘Disconnect Device’
option in the application menu before disconnecting the USB cable/
device.
Note : If the USB cable/device is disconnected prior to clicking the
‘Disconnect Device’ option the device will restart.