Vitalograph alpha 6000, Инструкция по эксплуатации

Страница: 12 / 40

A Global Leader in Respiratory Diagnostics
12 Page of 40
EN
DT_0006 Issue 15
option will display a list of the sessions available for print. Clicking on a
session will allow it to be reviewed, a long press will print.
Report Configuration: Select in ‘Configuration’ of the Main
Menu to configure reports. Options include enable/disable predicted
shading, predicted I-bars, test graphs, report % predicted, session
comments, subject comments, environmental data, auto acceptability
and posture.
3.3.1. Internal Printer
The device has an internal 4” thermal printer.
To load paper to the internal printer: with the device facing forward
press the printer button to open the door. Remove the tape from the
new paper roll, unroll a small amount of paper and load it into the paper
holder with the blue writing facing out on the right-hand side. Close the
printer door.
Figure 4
Note: The internal (thermal) printout will fade over time when exposed to
light or heat. If a permanent record is required, photocopy the thermal
printout or send the report to the Device Studio Utility.
3.3.2. External Printer via Vitalograph Device Studio
The device can print to an external printer using the Device Studio
application.
To generate PDF reports from the device:
1. Use the USB cable supplied to connect the device to a computer
running Device Studio.
2. Ensure that Device Studio application is open, the device is switched