Vitalograph alpha 6000, Инструкция по эксплуатации

Страница: 11 / 40

09060 Issue 1
11 Page of 40
EN
Alpha - Instructions for Use
pressing the tabs .
There are additional options to add comments and information
on session quality and session interpretation.
The user may add comments of up to 250 characters to the results by
clicking in the top right corner. Select again to save and close.
The icons and in the bottom right corner allow the user
to select from pre-defined comments as per ATS/ERS 2019. Select
again to save and close.
The icon in the top right corner displays the session information,
quality, and interpretation. Select again to close.
3.2.4. Viewing VC Test results
VC test results may be viewed as either a Volume/time (V/t) or Volume
Bar graph by scrolling across the screens. First screen is the bar graph,
second is the V/t graph, third is the Results screen. All other viewing is
as per section 3.2.3
3.2.5. Saving and ending the Test Session
The device has capacity to store at least 20,000 tests, with a maximum
of 8 blows allowed for each test session. Stored session
information includes subject details and best pre-test if it is a
bronchodilator responsiveness test session.
A session ends and is saved when the user exits the test screen by
pressing the green arrow on the top right.
A session also ends and is saved if any of the following occur:
• The device is turned off.
• A new subject is created.
• The device is connected to Device Studio.
3.3. Reporting
To print the current subject test session:
1. Select the green forward arrow to go to the print screen.
2. Select the ‘Print’ icon on screen.
3. Alternatively returning to the main menu and selecting the ‘Reports’