© 2020 Vital Systems, Inc
13
MACH4 Plasma Screen Setup
For ArcOK may be chosen within the Mach4 without any external ArcOK by using Analog Voltage
or an external ArcOK signal can be used as an input to the HiCON 7866 Motion Controller. Both
the cases are described as follows,
1.
USE ANALOG VOLTAGE FOR ARC OK
Use Mach4 to load the profile “Mach4PlasmaVITAL.m4prof”
Select Configure >> Plasma Screen Setting
In the Global settings, choose Default THC Mode to ‘Analog’