© 2020 Vital Systems, Inc
10
Step 1:
The height that the Z-Axis was at when the cut sequence began.
Step 2:
The torch head comes down to contact the material to determine the material height
(probe).
Step 3:
The torch head lifts to ignition height and turns on.
Step 4:
The Arc Ok signal is detected and the torch moves to pierce height.
Step 5:
Torch waits for pierce delay to complete and XY motion begins. THC delay timer is
started.
Step 6:
THC delay is complete and the THC takes over Z-Axis control
