- 8 -
Apparatus switching off
When all the treatment procedures are over, switch the apparatus off, disconnect it
from the power source, disconnect the vibrophones and put them into protective case to
avoid damage of their membranes, then put the device into its original package.
In the case if before switching off the apparatus was in the status of reduced power
consumption, it is recommended to interrupt it by pressing the button
C
«Start / Stop»
(6). Then the device can be switched off.
During long breaks between using sessions the apparatus should be stored in its
initial package in the conditions, enlisted in the chapter “EXPLOITATION,
TRANSPORTATION AND STORAGE RULES”.