25
24
In this way the unit will repeat the last sequence with the same speed and the
same temperature, for the time you set. It is very useful, for example, to give a
final touch to food preparations that are not to your liking, without the need to
reset all the digits again.
DELAYED DEPARTURE
There are 3 ways to operate the machine with the late departure.
MANUAL PROGRAMMING
When the machine is turned on, to set the current time, press and hold the
button “clock” for 5 seconds till you will hear 3 beeps. Now the display shows
“- -: - -” with the first two lines that are flashing, they indicate the hour, with the
“+” and “-” buttons you could just set the time format 0-24.
Once you have chosen the time, you have to store your data by pressing the
“start / stop” button: after flashing, the second two lines are to indicate the
minutes: with the same procedure you store the minutes.
Then, you must set the time you want the appliance get started, and with the
same system you set the hour .
Once you confirm the information with the START / STOP button, the display will
show the clock icon, which means that we must set (again with the “+” and “-”
buttons) the time we want the machine starts working; it must be confirmed by
pressing “start / stop” as well.
Next, the display shows the icon of the thermometer, if you want to set a
temperature, always with the “+” and “-” buttons, and pressing the “start / stop”
button to confirm. If you do not want any temperature, press the “start stop”
button and skip this step.
Now the blades’ icon appears on the display, and as above, adjust the speed
with the “+” and “-” buttons, and store the data. If you want a speed pulse, press
the “pulse” button before storing the data.
Once you set the last digit of speed, you will hear 4 beeps, the machine is put
on standby, the display shows the current time and the clock icon is flashing.
In this condition the machine waits for the set time to perform the set functions.
Speeds will be set only up to 3, the temperature will be up to 95 ° and the time
up to 4 hours.
COMPLETE A RECIPE IN MEMORY:
Once selected a recipe that you want to perform with the delayed start, press
and hold for 5 seconds the “clock” button and you will then hear 3 beeps.
Now the display shows “- -: - -” with the first two lines that are flashing, they
indicate the hour, with the “” and “-” you could just set the time format 0-24.
Once you have chosen the time, you have to store your data by pressing the
button “start / stop”: after flashing the second two lines indicate the minutes to
the same procedure time you store the minutes.
Then, you must set the time when you want the appliance will get started, with
the same system with which he had set the hour earlier.
Once you set the last value, you will hear 4 beeps, the machine is put on standby,
the display shows the current time and the clock icon is flashing.
In this condition the machine waits for the set time to perform the set function.
In this case, the first step of the recipe selection starts, then once finished
the machine stops and waits for the start for the next step.
CAUTION: Always check that the ingredients are introduced in the
recommended amount from the display.
WARNING: Failure to maintain the quantity of food could cause serious
damage to things and people.
CAUTION: Never leave your appliance unattended during the
operations.
SINGLE STEP OF A RECIPE
When you pick a recipe of which you want to make a single step with the delayed
start, first you need to do the above steps in the ordinary way, then once the last
step is over, and before you give the start to the next step, press and hold for 5
seconds the “clock” button and you will hear 3 beeps.
Now the display shows “- -: - -” with the first two lines that are flashing, they indicate
the hour, with the “+” and “-” you could just set the time format 0-24 .
Once you have chosen the time, you have to store your data by pressing the button
“start / stop”: after flashing the second two lines indicate the minutes: with the
same procedure for storing the hours, you now store the minutes.
Then, you must set the time at which you want the appliance getting started, with
the same system by which you had set the hour earlier.
In this case, the step being part of the chosen recipe starts. At the end of
it, the machine stops and waits for the start of the next step, or it beeps
while the recipe has been completed.
WARNING: Always check that the ingredients are being introduced in the
recommended amount as per the display indication.
WARNING: Failure to maintain the quantity of food could cause serious
damage to things and people.
CAUTION: Never leave your appliance unattended during the operations.
It is possible to check if set data are correct when the machine is in
standby, with the clock flashing, by pressing the start / stop button: set
digits appear in sequence with the appropriate icon.
