visual engineering DTC TM-RX Скачать руководство пользователя страница 4

Страница: 4 / 45

TM-RX Receiver

May 2021

Visual Engineering

Video solutions. Integrated

visualengineering.co.uk

Page 4

Document History

Warranty and Support

All Visual Engineering products are supplied as standard with a 12 month ‘Return to Base’ warranty.

Please note: Any unauthorised product disassembly, modification or the removal of tamper

proof labels will void the warranty.

In the event of a suspected product failure, users should contact the Visual Engineering support

team on the telephone 44 (0) 1206 211842 or please email us at:

[email protected]

Should the fault persist or if the support team are unable to resolve the fault, it may be necessary

to return the equipment.

Equipment should only be returned using the RMA (Returns Management Authorisation) process.

Users should contact the support team on the above number and request an RMA number.

Version

Date

Change Summary

Author

v1.00

12/12/2017

Initial Draft

v1.01

29/03/2019

Product Updates

v1.02

13/08/2020

Feature Updates

v1.03

07/08/2020

Adding a Custom Camera

v1.04

15/03/2021

Transcoding, JSON Config, Info and Security Apps

v1.05

30/03/2021

Orientation Sensor

v1.06

04/05/2021

Firmware Update Procedure

Safe Operating Procedure

• The equipment should be operated within the environmental limits as detailed in the

Specifications

section of this user manual.

•  Only authorised and trained personnel should operate the equipment.
•  There are no functions that require the user to gain access to the interior.
•  Changes to the radio settings as described in the

Maintainer Guide

section should only be

carried out by personnel that have had the appropriate training.

Содержание DTC TM-RX














































Результаты поиска

Содержание DTC TM-RX

Отзывы:

Похожие инструкции для DTC TM-RX

Бренды по названию

Популярные бренды

visual engineering DTC TM-RX, Руководство пользователя

Результаты поиска

Содержание DTC TM-RX

Отзывы:

Похожие инструкции для DTC TM-RX

Бренды по названию

Популярные бренды