TM-RX Receiver
May 2021
Visual Engineering
Video solutions. Integrated
visualengineering.co.uk
Page 39
4. Show Details Check box
5. Show Names
6. Display Pane
When the ‘Show Details’ box is checked the node information is expanded to display TX IP Packet
information, which can be useful when diagnosing network problems.
When the ‘Show Names’ box is checked the user friendly names for the nodes are shown on the
network map display.
In the previous example the network display is selected. This gives a simple graphical view of the
nodes in the Mesh and the links between them.
Note
: The buttons above the display are greyed out as they have no function when the ‘Network’
radio button is selected.
Each node is shown as a circle with a white number. If the number turns red, then the node is
temporarily congested.
If the ‘Show Names’ box is checked, the node name is displayed.
The links between the nodes are shown as coloured lines. As each node supports bi-directional
operation there are normally two lines for each link. Here is what the colours mean:
Note:
In the above example the lines are static, when connected to a live system these lines change
as the state as the RF environment changes or nodes move about.
Colour
Meaning
Green
16 QAM mode – maximum data rate
Amber
QPSK mode – reduced data rate
Red
BPSK – lowest data rate passing between nodes
White
Link broken or not configured
