TM-RX Receiver
May 2021
Visual Engineering
Video solutions. Integrated
visualengineering.co.uk
Page 17
Radio settings gives an
overview of the current status
of the system radios. Since the
selected Device shown here is
“Internal” this information is
relevant to the TM-RX.
To get the status of a
supported remote camera’s
radio module toggle using the
Device
Button.
Select
Setup
to enter the
radio’s Global Settings.
Radio App
In Global Settings it is possible to
change the system radio type.
Pressing
Edit
with Radio Mode
selected will allow the radio type
to be changed between either
Mesh or COFDM point to point
(if the system has this licence
included).
Warning: Changing the TM-RX
Receiver to a different radio type
to the remote camera will cause
the link between the two to stop
working.
In
Global Settings
the options include the following:
• Radio Mode -
Toggles between Mesh and COFDM radio types (if appropriate licence held
for COFDM radio).
• Host Name -
Shows current name. Edit using the on-screen keyboard.
•
Current Config -
Shows config of current radio preset channel. Edit toggles through the
various preset channels 1-16.
• DHCP -
Edit toggles this function on or off.
• IP Address -
The radio module IP address. Edit using the on-screen keyboard.
• Subnet Mask -
The radio module subnet mask. Edit using the on-screen keyboard.
• Default Gateway -
The radio module default gateway. Edit using the on-screen keyboard.
