TM-RX Receiver
May 2021
Visual Engineering
Video solutions. Integrated
visualengineering.co.uk
Page 35
Status Overview Settings
Item
Options
Notes
Node ID
0 to 11 or 0 to 15
Node IDs 1 and 2 are shown. There could be up to
sixteen nodes in a Mesh, numbered 0 to 15.
Unit Name
Up to 12
characters can be
used for the Unit
Name
The Unit Name is a user friendly name to make it easier
to identify each camera node. This name is assigned in
the Global Settings Tab.
IP Address
192.168.1.180
for example
This shows the IP address of the unit that is set up in
the initial configuration. It is shown as a hyper-link. The
browser will switch to the node of the selected hyper-link.
Battery Voltage
0 to 16V
This returns the current input voltage of the node.
The voltage should show approximately 12v.
Occupancy
Blue and Orange
Bars
The blue bar gives a visual indication of the volume of
data generated by this node. An orange bar gives a visual
indication of the volume of data passing through.
Show Details
Check box
Displays network information about IP packets etc.
This displays detailed
status information
of received signal
quality and enables
navigation between
nodes. The Status tab
is divided into three
sub-tabs:
•
Overview
• Spectra
• Maps
