Installation Guide
12
Cable Installation
1. Back the set-screws off fully before attaching the cable. Do not
use the attaching screws to “pull” the cable onto the female D
Sub connector of the board.
2. Orient the D Sub on the cable properly and apply slight even
pressure while connecting the D Subs.
3. Secure the Universal Cable in place with the two screws.
4. Attach the patch cables to the Universal Cable as per the
installation.
NOTE
Apply strain relief as required when attaching patch
cables. The set-screws will easily support the
Universal Cable strain, but will not take into account
the wieght and strain of any connected cables.
Содержание ReelTime 4
