Visual Circuits ReelTime 4, Руководство пользователя

Страница: 23 / 75

15
J
UMPER
C
ONFIGURATIONS
The following figures show the default jumper settings for the
ReelTime 4 and 4ReelTime Pro board. These jumper settings are
for normal operation. The exception is the voltage jumper. This
jumper can be set as follows:
❏
Right position: Use 3.3V power on the bus for reduced
power consumption and heat dissipation
❏
Left position: Default: Use 5V power on the bus (if the
machine doesn’t have 3.3V.)
Be sure to verify with your system or motherboard manufacturer
for PCI voltage information.
Figure 6. ReelTime 4 (Default) Jumper Diagram
Voltage Jumper (3.3v
selected)
This is the voltage jumper that
may need to be changed.