Editing Driver Settings
25
Svideo
0 = Composite video output.
1 = Composite and S-video outputs.
VideoHSize
If non_zero, fix the horizontal pixel number.
Set auxskip=1 if this value is used / not set=0.
VideoPicRate
If non-zero, fix the frame rate to the value.
Set auxskip=1 if this value is used / not set=0.
VideoTypes
0 = S-Video/Composite.
Setting one value determines output for the whole server. If S-
Video/Composite video with RGB output is required, refer to the
following table.
NOTE
You can set up multiple boards in a system for
different video type output. A value must then be
set for each card. The first board recognized in the
system's PCI bus will be the furthest value to the
right in the Video Types field. The boards will then
be in order from
right to left.
If only composite/S-video or RGB is required for the
whole system, only one value 0 or F is required.
Содержание ReelTime 4
