Vista SmartDisc 4/10 VLS-04DR-Series, Руководство по установке

Страница: 35 / 74

4 Commissioning
34 Vista SmartDisc
user confirms the alarm with Report again , another call will be made
6 minutes later. If the user clicks Do not report again , the transmitter will
call to report the hard disk error the next time the error is detected again
with device restart.
■ Select option Routine call every 24 hours , if you want to report
operability of your SmartDisc at regular intervals to a SmartControl
station. No images will be transmitted during this connection. The calls will
be logged in the log files of the transmitter and of the receiver.
■
SmartDisc checks all connected video signal inputs for video signal failure
(faulty camera, faulty video line, low contrast image, e.g. by covered lens).
Failure is reported for active cameras if the video signal has been disturbed
for about 10 seconds. The check interval follows the respective recording
interval. In the event of a faulty video signal, recheck takes place after
3 seconds. Recording is resumed after error elimination. For non recording
video cameras failure will be reported after 60 seconds.
If you require additional features, please refer to the additional
configuration options in files CAMTEL.INI or CAMCTRL.INI . Refer to the
respective information in the SmartControl or SmartControl PRO
software online manuals.