HyperVision DHV series Скачать руководство пользователя

Страница: 1 / 105

Revised Edition

November 2004

CyberVision Inc.

This material, information and instructions for use contained herein are the

property of

CyberVision Inc.

Norof this manual, including the products and software described in

it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any

languages in any form or by any means, except documentation kept by the purchaser for backup

purposes, without the express written permission of

CyberVision Inc.

Liability.

CyberVision Inc.

provides this manual “AS IS” without warranty of any kind, either

express or implied, including but not limited to the implied warranties or conditions of

merchantability or fitness for a particular purpose. In no event shall

CyberVision Inc.

, its

directors, officers, employees or agents be liable for any indirect, special, incidental, or

consequential damages (including damages for loss of profits, loss of business, loss of use or data,

interruption of business and the like), even if

CyberVision Inc.

has been advised of the possibility

of such damages arising from any defect or error in this manual or product.

Specifications or information contained in this manual are furnished for informational use only,

and are subject to change at any time without notice, and should not be constructed as a

commitment by

CyberVision Inc.

assumes no responsibility or liability for any

errors or inaccuracies that may appear in this manual, including the products and software

described in it.

Trademarks.

Product and cooperate names appearing in this manual may or may not be

registered trademarks or copyrights of their respective companies, and are used only for

identification or explanation and to the owners’ benefit, without intent to infringe.

Translated material.

Any discrepancies, errors or omissions in non-English versions of this

manual should be referenced to the English version for clarification.

CyberVision Inc.

8F, No. 147,

Hsien-cheng 9

Road,

Chu-pei City, Hsin-chu Hsien,

Taiwan R.O.C.

Telephone: +886

(3)

553

8998

Fax:

+886

(3)

553

8968

World Wide Web:

http://www.cybervision.com.tw

Email – Sales & Enquires: [email protected]

Email – Technical Support: [email protected]

EMBEDDED-LINUX DVR

HyperVision

DHV series

User Manual

Version 4.0

English

Содержание DHV series










































































































Результаты поиска

Содержание DHV series

Отзывы:

Похожие инструкции для DHV series

Бренды по названию

Популярные бренды

HyperVision DHV series, Руководство пользователя

Результаты поиска

Содержание DHV series

Отзывы:

Похожие инструкции для DHV series

Бренды по названию

Популярные бренды