Vista powerdome pro series, Руководство по установке

Страница: 54 / 83

PowerDome PRO manual V3-6
53
4. Run Mode :
When the Learn Tour command is sent, the dome can be set to either run the Le arn Tour Once or
Continuously.
5. Test Learn Tour :
This allows the operator to test the Learn tour from within the menus.
6. Delete Current Tour :
The current learn tour is deleted.
5.4 Autopan Setup
Main menu → Function Setup → Autopan setup
This function allows you to set the left and right edges of an area to be monitored, and the VPP can then
be set to move back and forth between these two points. Up to four Autopan modes can be set. The
speed for Autopan can be set.
1. Autopan No :
This sets the Autopan mode number, ranging from 001 to 004.
2. Title :
Each Autopan tour can be titled.
3. Set Left Limit:
This sets the left edge of the area to be scanned. Follow the on screen instructions.