Vista powerdome pro series, Руководство по установке

Страница: 67 / 83

PowerDome PRO manual V3-6
66
3 and 4 Pin Telemetry boards
Dependant on the telemetry type the board will have rather 3 or 4 pairs of pins protruding from it as well as an
8 pin socket. Ensure that the pins are correctly loc
ated and that the board is ―square‖ to the lower Power
board, see images below for clarification.
3 Pin Board option:
4 Pin Board option:
Ensure the board is parallel with line on lower Power
Board
Ensure 3 pins are located in the holes furthest
from hinge of the drop down platform.
Ensure the board is parallel with line on lower Power
Board
Ensure that all 4 pins are correctly located in the
sockets.
Note:
Once the dome telemetry board is fitted, then select the correct dip switch settings on the camera
Yoke, refer to the beginning of this Appendix page 65.
For Termination of Data, if using RS485 boards, refer to page73.