D-302756
49
4.9 User Interface Customization
4.9.1 Enabling Trouble Beeps
Under trouble conditions, the sounder emits a series of 3 short beeps once per minute. Here you determine whether this
special beeping sequence will be active, inactive, or just inactive at night (the range of “night” hours is defined in the factory
but is usually from 8 PM until 7 AM).
The 3 options are:
enable beeps
(default in USA),
off at night
(default) and
disable beeps
.
To Enable Trouble Beeps
1.
Make sure the system is disarmed and then press the
button
repeatedly until the PowerMax10-G2 display reads
"
INSTALLER MODE
".
2.
When the PowerMax10-G2 display reads
[
INSTALLER MODE
]
,
press
OK
I
.
The screen will now prompt you to enter your installer code.
OK
I
3.
Enter your Installer Code.
CODE
4.
Press the
or
button repeatedly and select the [
DEFINE PANEL
]
option.
or
5.
When the PowerMax10-G2 display reads [
DEFINE PANEL
], press
OK
I
The PowerMax10-G2 display will read [
01:ENTRY DELAY 1
].
OK
I
6.
When the PowerMax10-G2 display reads
[
01:ENTRY DELAY 1
],
press
the
or
button repeatedly until the display will read [
11:TROUBLE
BEEPS
].
or
7.
Press
OK
I
and make the selection and then press
OK
I
to confirm.
The PowerMax10-G2 display will revert to [
11:TROUBLE BEEPS
].
OK
I
SELECT OPTION
OK
I
You can now press the
or
button to program any other menu in
"
DEFINE PANEL
"
or
press the
button to take you to "
<OK> TO EXIT
"
.
4.9.2 Enabling Piezo Beeps
Here you determine whether warning beeps will sound or muted during exit and entry delays. An additional option is to
mute the warning beeps only when the system is armed “HOME”.
Options:
enable beeps
(default),
off when home
(default in UPGM and
disable beeps
.
Note:
When exit beeps are disabled toward the end of a delay, the happy (success) melody will sound.
To Enable Piezo Beeps
1.
Make sure the system is disarmed and then press the
button
repeatedly until the PowerMax10-G2 display reads
"
INSTALLER MODE
".
2.
When the PowerMax10-G2 display reads
[
INSTALLER MODE
]
,
press
OK
I
.
The screen will now prompt you to enter your installer code.
OK
I
3.
Enter your Installer Code.
CODE
4.
Click the
or
button repeatedly and select the [
DEFINE PANEL
]
option.
or
5.
When the PowerMax10-G2 display reads [
DEFINE PANEL
], press
OK
I
The PowerMax10-G2 display will read [
01:ENTRY DELAY 1
].
OK
I
11:TROUBLE BEEPS
11:TROUBLE BEEPS
01:ENTRY DELAY 1
ENTER CODE:
INSTALLER MODE
READY 00:00
DEFINE PANEL
01:ENTRY DELAY 1
ENTER CODE:
INSTALLER MODE
READY 00:00
DEFINE PANEL
