D-302756
33
The PowerMax10-G2 display will read [
broadband
]. Here you determine if the
Broadband Module line disconnection will be reported or not and determine the
delay between detection of line disconnection and report failure. If the telephone
line is disconnected, the event "BBA line fail" will be stored in the event log.
97.
Press the
OK
I
button.
The PowerMax10-G2 display will read [
don't report
].
OK
I
98.
Press the
or
button repeatedly to select between "
2 minutes
",
"
5 minutes
", "
30 minutes
", "
60 minutes
", "
180 minutes
" and "
don't
report
", for example, "
30 minutes
".
or
99.
Press
OK
I
to confirm the selection.
The PowerMax10-G2 display will revert to [
broadband
].
OK
I
100.
Press the
button.
The PowerMax10-G2 display will revert to [
LINE FAIL REPORT
].
You can now press the
button to take you to the "
PSTN UP/DOWN
" menu
(see Configuring Remote Programming Access Permissions),
or
press the
button to take you to "
<OK> TO EXIT
".
4.6.3.8 Configuring the Event Types to be Reported to the Monitoring Station
Continue below from the previous section or repeat steps 1 to 7 of section 4.6.3.1and then press the
or
button repeatedly until the PowerMax10-G2 display will read [
AUTO TEST TIME
]
101.
Press the
button.
The PowerMax10-G2 display will read [
RPRT CNFRM ALARM
]. Here you
determine whether the system will report whenever 2 or more events
(
confirmed alarm)
occur during a specific period.
102.
Press the
OK
I
button.
The PowerMax10-G2 display will read [
disable report
].
OK
I
103.
Press the
or
button repeatedly to select between
"
disable report
", "
bypass
" and "
enable report
", for example,
"
enable report
".
or
104.
Press
OK
I
to confirm the selection.
The PowerMax10-G2 display will revert to [
RPRT CONFRM ALARM
].
OK
I
105.
Press the
button.
The PowerMax10-G2 display will read [
RECENT CLOSE
]. Here you enable or
disable the “recent closing” report, that is sent to the Monitoring Station if an alarm
occurs within 2 minutes from the expiry of the exit delay.
106.
When the PowerMax10-G2 display reads [
RECENT CLOSE
], press the
OK
I
button.
The PowerMax10-G2 display will read [
recent cl. OFF
].
OK
I
107.
Press the
or
button to select between "
recent cl. OFF
" and
"
recent cl. ON
", for example, "
recent cl. ON
".
or
108.
Press
OK
I
to confirm the selection.
The PowerMax10-G2 display will revert to [
RECENT CLOSE
].
OK
I
RECENT CLOSE
RPRT CONFRM ALARM
broadband
rem. access OFF
recent cl. ON
recent cl. OFF
RECENT CLOSE
enable report
enable report
disable report
RPRT CNFRM ALARM
LINE FAIL REPORT
broadband
don't report
30 minutes
30 minutes
