36
D-302756
19.
Press the
OK
I
button and enter the third private telephone number
(including area code, if required) of the private subscriber to which the system will
report the event groups defined in Report To Private.
OK
I
3
rd
PRVT TEL. NO
20.
Press the
OK
I
button.
The PowerMax10-G2 display will revert to [
3
rd
private tel#
].
OK
I
21.
Press the
button.
The PowerMax10-G2 display will read [
4th
private tel#
].
22.
Press the
OK
I
button and enter the fourth private telephone number
(including area code, if required) of the private subscriber to which the system will
report the event groups defined in Report To Private.
OK
I
4
th
PRVT TEL. NO
23.
Press the
OK
I
button.
The PowerMax10-G2 display will revert to [
4th private tel#
].
OK
I
24.
Press the
button.
The PowerMax10-G2 display will read [Redial attempts]. Here you determine
the number of times the communicator will dial the called party’s number
(private telephone).
25.
When the PowerMax10-G2 display reads [
Redial attempts
], press the
OK
I
button.
The PowerMax10-G2 display will read [
3 attempts
].
OK
I
26.
Press the
or
button repeatedly to select between
"
1 attempt
", "
2 attempts
", "
3 attempts
" and "
4 attempts
", for example,
"
1 attempt
".
Attention!
A maximum of 2 dialing attempts is permitted by the Australian
Telecommunication Authority.
or
27.
Press
OK
I
to confirm the selection.
The PowerMax10-G2 display will revert to [
Redial attempts
].
OK
I
28.
Press the
button.
The PowerMax10-G2 display will read [
Tel. acknowledge
]. Here you
determine whether the system will use the single acknowledge or the all
acknowledge mode when reporting to private telephones.
Note:
In the single acknowledge mode, receiving an acknowledge signal from
a single telephone is sufficient to consider the current event closed and call off
the communication session. The remaining telephones serve for backup
purposes only. In the all acknowledge mode, an acknowledge signal must be
received from each telephone before the current event is considered reported.
29.
When the PowerMax10-G2 display reads [
Tel. acknowledge
], press the
OK
I
button.
The PowerMax10-G2 display will read [
single ack
].
OK
I
30.
Press the
or
button to select between "
single ack
" and "
all
ack
", for example, "
all ack
".
or
31.
Press
OK
I
to confirm the selection.
The PowerMax10-G2 display will revert to [
Tel. acknowledge
].
OK
I
32.
Press the
button
33.
The PowerMax10-G2 display will revert to [
VOICE REPORT
].
Tel. acknowledge
Redial attempts
VOICE REPORT
4th private tel#
4th private tel#
3rd private tel#
single ack
Tel. acknowledge
3 attempts
Redial attempts
all ack
all ack
1 attempt
1 attempt
