D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
85
6 READING THE EVENT LOG
Events are stored in the event log. You can access this log and review the events, one by one. If the event log
fills up completely, the oldest event is deleted upon registration of each new event.
The
date
and
time
of
occurrence
are
memorized
for
each
event.
When reading the event log, events are shown in chronological order - from the newest to the oldest. Access to the
event log is provided by clicking the
button and not through the installer’s menu. The reading and erasing
process of the event log is shown below.
Step 1
Step 2
Step 3
Step 4
Step 5
In normal operating
mode
[1]
Enter Installer Code
[2]
Reviewing Events
[3]
Scroll List of Events
[4]
Continue
to Step
6.
Step 6
Step 7
Step 8
Step 9
CLEAR EVENT LOG
display
[6]
Erase the Event Log
[7]
Event Log is erased
[8]
Returns to normal
operating mode
[9]
➯
- Reading Events
[1]
While the system is in the normal operating mode, press the
key.
Reading the Event Log
[2]
Enter the current Installer Code and then press
to enter "
LIST OF EVENTS
".
[3]
The latest event is shown.
The event is displayed in two parts, for example, "
Z13 alarm
" then "
09/02/10 3:37 P
".
[4]
Press
repeatedly to
scroll through the list of events.
Erasing and Exiting the Event Log:
[6]
From anywhere within the event log, press the
button and then press
.
[7]
At this stage in the procedure, clicking the
or
buttons will take you to “
<OK> TO EXIT
”
without erasing the event log. Clicking the
button will revert to “
CLEAR EVENT LOG
”.
Press the
button to erase the event log.
[8]
The system erases the event log
[9]
Press
to revert to normal operating mode.
Clicking the
button repeatedly at any stage in the procedure takes you one level up with each
click. Clicking the
button will take you to “
<OK> TO EXIT
”.
09/02/10 3:37 P
CLEAR EVENT LOG
<OFF> to delete
<OK> TO EXIT
READY 00:00
07/02/10 11:49 A
SR2 TAMPER
-
ALARM
Z13 alarm
LIST OF EVENTS
ENTER CODE:
READY 00:00