Visonic POWERMASTER-10, Руководство по установке, Страница: 59 / 106

58 D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
3.6.4 Configuring Events Reporting to Monitoring Stations
The PowerMaster-10 / PowerMaster-30 control panel is designed to report alarm, alerts, troubles and other events
and messages to two Central Monitoring Stations C.S.1 and C.S.2 via PSTN telephone line, Cellular i.e. GSM
voice (analog), GPRS (IP) & SMS or Broadband IP communications channels. In this section you configure and
define all parameters and features required for the reporting of the event messages to Monitoring Stations such as:
•
The events reported to each of the two Monitoring Stations C.S.1 and C.S.2 and corresponding backups.
•
The communication means (channel) used for the reporting and the backup means (channel) in case of
failure.
•
The customer's (subscriber) account number(s) to be reported to each monitoring station.
•
The telephone numbers, IP addresses and SMS numbers and reporting formats of the corresponding alarm
receivers at the two Monitoring Stations C.S.1 and C.S.2 and the number of reporting retry attempts in case
of failure to report.
•
The communication Auto Tests and communication Fail reports.
•
The reporting of certain system function events such as "Confirmed Alarm", "Recent Close", Zone Restore"
and "System Not-Used".
Means
scroll
and
select
To configure an option enter the menu, select the option you wish to configure (see
guidance above and in section 3.6.1), then refer to the table below which provides you with detailed
explanations and configuration instructions for each option.
Option Configuration Instructions
Here you determine which events (i.e.
Alarms (
alrm alrm alrm alrm
)
;
Open/close (
o/c
o/c o/c
o/c
)
;
Alerts
(
alrt alrt alrt alrt
)
;
Maintenance
and
Troubles
) will be reported to the Monitoring Stations. Due to
lack of space in the display, the abbreviations
alrm alrm alrm alrm
,
alrt alrt alrt alrt
,
o/
o/ o/
o/
c c c c
and
all all all all
(i.e. all
events) are used.
The minus (-) symbol means "less/except" e.g.
all(
all( all(
all(
- - - -
alrt)
alrt) alrt)
alrt)
means
all
all all
all
events except
alerts
alerts alerts
alerts
.
The asterisk ( ) is a separator between events reported to
Monitoring Station 1
(C.S.1) and events reported to
Monitoring Station 2
(C.S.2). For detailed and more
complete explanation see the "
Event Reporting Chart
" at the end of this section.
Option settings:
all-o/c backup
(default)
all-o/c o/c disable report
all all all(-alrt) alrt all backup
all-o/c all-o/c alrm all(-alrm)
Note: Alarm events ( alrm alrm alrm alrm ) have the highest priority and Alert events ( alrt alrt alrt alrt ) have
the lowest priority.
If the system is equipped also with Cellular communicators, you must define which of
the communicating channels (i.e. Cellular or PSTN) the system will use as the main
channel (i.e. 1
st
priority) for reporting event messages to Monitoring Stations, and if the
main channel fails, which channels will be used in the 2
nd
and 3
rd
reporting priorities.
Enter the "1
st
RPRT CHAN"; option and define which of the communication channels
the system will use as the main reporting channel. If you wish to define also backup
reporting channels, enter the "2nd RPRT CHAN" and "3rd RPRT CHAN" options and
define them as well.
04:3rd RPRT CHAN
03:2nd RPRT CH AN
02:1st RPRT CHAN
01: REPORT EVENTS
3:C.S.REPORTING
3:C.S.REPORTING OPTION you wish
04.COMMUNICATION