Viso Systems LabRail, Руководство пользователя

Страница: 8 / 25

8
Important: Please check that rail pieces are indeed accurately
aligned by running your finger across the assembly lines. If needed,
loosen the screws and re-align. Even small misalignments may
prevent the dolly from travelling accurately mechanically.
6. Remove the end stop cover and attach the end stop to the rail with
8 grub screw and 4 connector profiles inside the upper and lower
grooves. Note: The end stop should have the spring load part facing
downward
7. Turn the rail up-side-up.
8. Go to the injector unit on the rail end farthest from the goniometer
9.
Push the rail conductor pieces into the top groove in both sides of
the rail. Fill each groove.