Viso Systems LabRail, Руководство пользователя

Страница: 16 / 25

16
Use the standard 25 m RJ45 cable (normally used to connect the sensor to the
LabSpion mainboard) to connect the LabRail injector to LabSpion mainboard.
Make sure that the cable is secured so that it does not interfere with the function of
the LabRail and out of the way of people working in the laboratory.
Check that the sensor is connected to the system – indicated in the upper right-hand
corner of the software dashboard
Checking connection
To check the connection, you can go to the Help menu and check that the menu
point “LabRail (Firmware) is visible”
You can also click on Setup
→
Labrail
→
Tool:
And the click on the “Check dataline” to ensure that the connection is good.