Vislink HDR-1000, Руководство пользователя и техническое руководство

Страница: 8 / 54

Page 8
HDR-1000 User and Technical Manual
RSSI/SNR
To select the RSSI or SNR monitoring function, press the
RSSI/SNR key to toggle between the settings. The SNR or
RSSI LED illuminates to indicate the selection. Column 1
displays information for ANT1; Column 2 for ANT2. RSSI
displays the Relative Signal Strength, while SNR displays
the Signal to Noise Ratio.
Audio Levels
To set level, press AUDIO LEVEL 1 or 2, then press the Up
or Down arrow keys. The LEDs display the relative setting.
Next press SAVE.
NOTE : The HDR-1000 recalls the most recently
saved audio input setting when it is powered up.
NOTE : If the SAVE key is not pressed within 5
seconds of the new setting, the audio input level
returns to the most recently used value and the
selection mode is canceled.
SAVE Key
To save new settings including Audio Levels and Presets,
you must press the SAVE key to complete the task.
PRESET Button
To select a Preset (1 - 16), complete the following steps:
1. Press the PRESET key. The currently selected preset
LED illuminates.
2. Press the Up ▲ or Down ▼ arrow keys to choose the
new preset you want.
3. The preset LED illuminates to indicate which preset was
chosen. Press SAVE to complete. Note that if the SAVE
key is not pressed within 5 seconds of the new setting,
the preset returns to the most recently used value and
the selection mode is canceled.