Page 26
HDR-1000 User and Technical Manual
HDR-1000 Screen:
Factory Settings
Screen (EXPERT USER)
Menu Path:
System > Factory Settings
Device Mode
(Device Mode
Section)
Select the
Transmitter
or
Receiver
radio button. Normal = Receiver.
Transmitter setting for repeater operation (not for normal operation).
Unit Serial Number
(Device
Mode Section)
Enter the
Unit Serial Number
into this fi eld.
BDC Serial Number
(Device
Mode Section)
The
BDC Serial Number
displays a 16 digit read-only number for the Block
Down Converter.
Network Interface MAC
Address
(Device Mode
Section)
Enter the hexadecimal
MAC Address
for the
Network Interface
Card in your
receiver, such as
AA:12:BB:34:CC:56
.
Using External Down
Converter
(Device Mode
Section)
Select the
Using External Down Converter
Checkbox and enter the
Down
Converter
frequency in MHz if you are Using
External Down Converter
.
This is only to be used with
External Down Converter
. Change Local
Oscillator to match RF frequency.
Down Converter Gain
(Device Mode Section)
If you are
Using External Down Converter
(above) enter the
Down
Converter Gain
(relative gain associated with
External Down Converter
)
for
Ch 1
and
Ch 2
in dB in the fi elds provided.
A/V Sync
(Device Mode
Section)
Set to
Enabled
or
Disabled
. Video Synchronization technique used with
companion HDT transmitter. Normal operation =
Disabled
.
A/V Frames
(Device Mode
Section)
Enter the number (2 = recommended) in the fi eld provided. Sets the
recommended buffer length for audio to video synchronization.
Apply
(Device Mode Section)
Click the
Apply
Button to set the new information for the receiver.
RF Module Test Report
(RF
Module Test Report Section)
To save
RF Module Test Report
, enter text in the fi eld provided, then click
the
Save
Button (below) to set to receiver.
Save
Click the
Save
Button to set the changes to the receiver.
Содержание HDR-1000
Страница 45: ...Page 45 HDR 1000 User and Technical Manual ...
Страница 54: ...HDR 1000 User and Technical Manual ...
