Vision Premium DSP Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 62

background image

PREMIUM DSP 40-80 KVA PF0.9 3/3 - UPS www.visionups.com

54

VII. MAINTENANCE

ATTENTION!

There are no parts inside the UPS or battery group that needs service or maintenance
work  that  should  be  done  by  user.  Therefore  DO  NOT  OPEN  THE  COVER  OF  UPS.
Never touch on any terminal of battery  group. There is risk of electric shock inside the
UPS  even  when  it  is  completely  turned  off  (because  of  energy  storage  components).
Therefore  unauthorized  openning  of  the  UPS  cabinet  for repairment, maintenance  etc.
is not recommended and forbidden. Otherwise serious injuries may happen.

7.1 Scheduled Maintenance

Some  parts  and  components  used  inside  UPS  requires  periodic  maintenance  by  service  personnel.
Besides, some power equipment inside the UPS need good air circulation for cooling functions. In this
case, the UPS should be cleaned against dust periodically. Cooling fans are mechanical and moving
parts  and  they  should  be  checked  periodically  for  this  reason.  Also  the  batteries  should  be  checked
periodically that if they are in good condition or not.

DSP0.9  Series UPS informs the user  about these  procedures  when the maintenance time is up  with
its 3 independent hour counter as warnings:

FAN MAINTENANCE counter
BATTERY MAINTENANCE counter
GENERAL MAINTENANCE counter

This type of protective maintenance prevents small problems turning up to big failures.

DSP0.9 Series UPS has been designed to require very low user maintenance work. User should
only make below maintenance procedure for long years of trouble-free operation.

7.2 Daily Checks

Observe the UPS daily and check the following:

Examine the operator control panel (front panel). Ensure that all LED indicators and parameter
measurements are normal and there is no warning or alarm messages on LCD display.

Examine that there is any sign of overheating the UPS or not.

Check the rotation of cooling fans visually.

Check if there is a remarkable change in the sound of UPS or not.

Check if air inlets of the cabinet cooling system are not congested with dust or any other foreign
object. Clean them with a vacuum cleaner if any present.

Take care not to leave any object on the UPS cabinet.

7.3 Weekly Checks

1. Examine the front panel and record the results.

2. Measure (from Measurements Menu) each of three phase voltages and record the values.

3. Measure (from Measurements Menu) UPS output current values and record the values.

4. Perform a Manual Battery Test (from Commands Menu) and check the status oft he batteries.

5. Cabinet covers may be cleaned with a soft damped (not wet) cloth.

«
...
54
55
56
57
58
...
»

Содержание Premium DSP































































Отзывы:

Нет отзывов

Похожие инструкции для Premium DSP

host power 1101rc

Бренд: Atlantis Страницы: 84

Бренд: Samsung Страницы: 128

Liebert PST5-850MT120

Бренд: Vertiv Страницы: 28

Бренд: Salicru Страницы: 40

Бренд: Power-Sonic Страницы: 35

Бренд: BAS-IP Страницы: 8

Бренд: Santak Страницы: 13

Бренд: Santak Страницы: 47

Бренд: Xtreme Страницы: 75

Бренд: Forza Страницы: 9

Бренд: OPTI-UPS Страницы: 1

Outdoor Series OD1000

Бренд: OPTI-UPS Страницы: 1

Бренд: CyberPower Страницы: 2

STANDBY UPS Series

Бренд: CyberPower Страницы: 7

Бренд: CyberPower Страницы: 43

SmartOnline SU750XL

Бренд: Tripp Lite Страницы: 5

SmartOnline SU6000RT3U

Бренд: Tripp Lite Страницы: 7

SmartOnline SU8000RT3U

Бренд: Tripp Lite Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды