Vision Research Phantom Miro LC Series, Руководство пользователя

Страница: 48 / 74

Phantom Miro M & LC Series Camera Manual
42
Recording a Cine
To begin recording to RAM click the red ‘Capture’
button.
The red ‘Capture’ button changes to “Abort
Recording” and the green “Trigger” button is
enabled when the camera is recording
The Abort Recording button instructs the camera to
stop recording, leaving the camera’s RAM empty.
Selecting the ‘Trigger’ button instructs the camera
to immediately stop recording when the ‘Trigger
Position’ is set to zero. If a value greater than zero
is set, the camera will continue to record ‘post-
trigger’ frames until the user-specified value is met.
Using the camera’s hardware ‘Trigger’
button, or an external trigger signal
provides a more accurate trigger to the
camera.
Once the camera has completed recording a Cine
in the camera’s RAM or saving to the Phantom
CineFlash it can be reviewed by selecting it from
the ‘Cine’ pull-down selection list in the PCC ‘Play’
tab.
A previously saved Cine stored on the computer’s
hard drive can be opened using the ‘Open File’
toolbar button (also places the file under the
‘Cines’ group folder in the Manager tab).
The viewing option can be changed via the ‘Play
Speed & Options’ and the Cines’ metadata can be
viewed in the ‘Frame Info’ and ‘Cine Info’ sections.
Triggering the Camera
Reviewing a Cine