Vision Research Phantom Miro LC Series, Руководство пользователя

Страница: 32 / 74

Phantom Miro M & LC Series Camera Manual
26
Defines whether the ‘Rising Edge’ (leading edge)
or ‘Falling Edge” (trailing edge) of a TTL supplied
input trigger signal is used to trigger the camera.
Specifies the length of time (defined in
microseconds) the trigger signal state (high or low)
must be held at to be a valid trigger signal.
Trigger Polarity
If ‘Trigger Polarity’ is set to ‘Rising
Edge’ the signal must be held low for a
minimum of 10-times the ‘Trigger Filter’
time prior to going high to be a valid
trigger signal.
Trigger Filter
Sets a delay time (defined in microseconds)
between the ‘Frame Sync’ clock pulse and the
frame capture to provide a phase shift in the timing.
Sets the signal type to be activated on the
‘Auxiliary’ pin of the capture connector.
Defines when the ‘Ready’ signal is turned off.
Adjust the color ‘Saturation’ of the images being
displayed. Increasing the value results in the
images being displayed with more brilliant color,
while decreasing the value results in the images
being displayed with less brilliant color.
The ‘Master Black’ (Pedestal) parameter is used to
change the voltage level corresponding to black or
to the maximum limit of black peaks.
‘Gain’ will raise or lower the gain in each
independent color channel when adjusted.
‘Pedestal will raise or lower the black level of each
independent color channel when selected.
‘Gamma’ will apply an independent gamma curve to
each color channel.
Frame Delay
Aux Signal
Ready Deasserts
Saturation
Master Black
Gamma
Pedestal
Gain
Gain, Pedestal, and Gamma settings are
applied on top of the overall gamma and
color corrections.