VISIO BW-1210 QW, Руководство пользователя

Страница: 7 / 20

6A
3.2 Main Functions
To select any functions, press the MENU button until the required one is showing on the display.
Select the function by the ENTER button and the display will blink. Use the DOWN and UP
button to change the mode. Once the required mode has been selected, press the ENTER button to
setup or it will automatically return to the main functions without any change after idling one
minute. Back to the functions without any change press the MENU button. The main functions are
shown below:
Once you set to , after running in show mode for 5 minutes
without any change or restarting the unit, the key board become locked.
Press the ENTER button to enable the menu, the display will show
,
press the UP and DOWN button until it shows , then press the
ENTER to unlock.