VISIO BW-1210 QW, Руководство пользователя

Страница: 3 / 20

2A
1. Safety Instruction
WARNING
y
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure
that they also receive this instruction booklet.
Caution:
y
All fixtures are intact from the manufacturer, please operate follow up the user manual, artificial
fault are not under guarantee repair.
y
Unpack and check carefully there is no transportation damage before using the unit.
y
The unit is for indoor use only. Use only in a dry location.
y
DO install and operate by operator.
y
Use safety chain when fixes the unit.
y
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces.
y
Be sure that no ventilation slots are blocked; otherwise the unit will be overheated.
y
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
y
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
y
Maximum ambient temperature Ta: 40
℃
. Don’t operate it where the temperature is higher than
this.
y
DO NOT connect the device to any dimmer pack.
y
First run, there will be smoke or smells, and all disappearing a few minutes later.
y
Make sure there are no flammable materials close to the unit while operating, as it is fire
hazard.
y
Look over power wires carefully, replace immediately if there is any damage.
y
Unit surface temperature may reach up to 60
℃
. DO NOT touch the housing bare-hand during
its operation.
y
Never run on for a long time lest shortening lifespan.
y
Avoid any inflammable liquids, water or metal objects entering the unit. Once it happen, cut off
the mains power immediately.
y
DO NOT operate in dirty and dusty environment, also cleaning fixtures regularly.
y
DO NOT allow children to operate the fixture.
Please read the instructions carefully which includes important
information about the installation, operation and maintenance.