Viscount Prestige IX, Руководство по эксплуатации

Страница: 54 / 88

Viscount PRESTIGE VIII - IX
52
-2# 71 6 #* !2
P P P P P P P
Each type of message (indicated on the top line of the display) has two filters, the first acting on transmission and the second
on reception.
Use the CURSOR
Õ and Ö keys to locate the flashing cursor on the filter to be modified, and with the encoder choose
between the value Y (YES = filter active) and N (NO = filter disabled). Remember that when a filter is active, the selected
type of message will be suppressed.
7.6 REGULATING THE DYNAMICS VALUE
The MIDI dynamics (velocity) value can be set individually for each manual and for the pedal section, at a value between 0
and 127.
After accessing the MIDI interface control function (by pressing the MIDI key), press PAGE
× as often as required to
obtain the following video page on the display:
#"* , ,
?= ?= ?= ?= ?= ?=
Use the CURSOR
Õ and Ö keys to locate the flashing cursor on the parameter to be modified, and turn the encoder to
select the appropriate value.
Pressing again PAGE
× it will be possible to set the MIDI dynamic level that the organ will transmit when the function
MIDI SOLO is activated (see page 6). The display will look as follows:
#"* , ,
B: B: B: B: B: B:
Press EXIT to exit or the PAGE
× and Ø keys to scroll through the other MIDI setting video pages.
The MIDI dynamics settings can also be saved in the instrument's memories.
7.7 MIDI TRASPOSITION OF THE NOTE CODE
The MIDI value of transmitted note can be transposed one or two octaves lower or higher.
Through the PAGE
× the display will show you transposer setting the cursor on the default value 0, it is possible to
transposer higher oe lower the MIDI value of the transmitted note. The possible values are: +2 (octaves), +1 (octave), 0 (no
transposition), -1 (octave), -2 (octaves).
C :
Receprion filter
Transmission filter