Viscount Prestige IX, Руководство по эксплуатации

Страница: 49 / 88

Viscount PRESTIGE VIII - IX
47
"dEr" (disk error) or "Ejt" (eject) on the 3 digit display indicates that the disk is illegible; insert the appropriate disk and
repeat the operations. The "noS" message on the 3 digit display indicates that the disk does not contain any information.
6.3 SAVING THE CONTENTS OF THE MEMORIES TO DISK
As for the voices, the contents of the dedicated or general memories can also be saved to floppy disk and reloaded as
necessary.
To do this, after inserting a formatted floppy disk in the drive, press the SETTING key and then the PAGE
× key until the
display shows:
',2- C
1#2 "'1) ', ," .31& R
Now enable recording on the floppy disk drive section of the control panel by keeping the PAUSE key pressed and pressing
REC. The consecutive number of the recording (file) will appear on the 3 digit display and the LEDs of the respective keys
will illuminate.
When the CURSOR
Ö key is pressed, the display requires further confirmation:
',2- C T
.31& R 2- !-,$'0+ -0 2- -02
Press EXIT here to abort the operation or press the CURSOR
Ö key again to start the saving procedures: the floppy disk
drive LED illuminates then the alphanumeric display will show:
',2- C
1202#"C 5'2',% #," -$ "'1)
When the operation is complete, the display returns to the video page for regulation of the volume levels.
Remember that when a saving procedure is carried out, the data relating to all the memories of all 8 banks are downloaded
onto the floppy disk.
The appearance of "dEr" (disk error) or "Ejt" (Eject) informs the user that the disk has not been formatted (see formatting
procedure in point 4.4), while the "dPr" (disk protected) error indicates that the disk inserted is protected against data
writing. In both cases, repeat all the saving procedures.
REC Key
PAUSE Key
3 Digit Dispay