84
Viscount Concerto III - Operating Manual
Locate the cursor on the voice of choice and use the encoder to modify the value (expressed in dB).
The modification will be audible in real time, making it easier for the user to obtain the setting
required.
Use buttons [CURSOR (PG) DOWN] and [CURSOR (PG) UP] in order to display the remaining
voices.
Once you have made all the changes you require, press [EXIT/NO] to return to display of the
VOICES menu.
4.4 CHECKING THE STOP LABELS
After having loaded the new voices in the internal memory of the organ , it could happen that the
name plates of the tabs do not correspond to the voices. Therefore please verify this and in case it
does not correspond, please change the name plates.
The LABEL CHECK function is available for this purpose. To recall this function, select the LABEL
CHECK option in the VOICES menu and press [ENTER/YES]:
The STOP field indicates the stop being checked (which will be constantly illuminated on the
panel), while the right of the display show the manual to which it belongs and the voice it now
controls.
Turning the Encoder you will read the names of the voices.
In case the display shows the message:
it will mean that the voice has been changed and that it is necessary to replace the name plate.
Once you have checked the labels of all the stops, press [EXIT/NO] to return to display of the
VOICES menu.
