115
Viscount Concerto III - Operating Manual
This video page allows you to enter the name of the modified song.
To do this, use the [CURSOR] buttons to move the cursor and the encoder to select the letter you
require.
Then press [ENTER/YES] to save the new song definitively.
DELETING GROUPS OF BARS
If you wish to delete given groups of bars from one or more tracks, recall the Clear function.
To do this, select the CLEAR field from the EDIT menu; the display will show:
consisting of the following parameters:
o
TRACK:
specifies the track on which you wish to delete the MIDI events in the interval of
bars set. Selecting “
ALL
” deletes all the data in all the tracks.
o
FROM M:
sets the number of the initial bar (measure) from which the deletion of the MIDI
events will start.
o
TO M:
sets the last bar number to be affected by the clear operation.
o
MODE:
selects the cancellation mode, as follows:
-
DELETE:
with this mode, all the MIDI events present after the deleted group of bars will
not be moved.
-
ERASE:
with this mode, all the MIDI events present after the deleted group of bars will be
repositioned from the bar specified with the FROM M parameter.
After setting the parameters you require, press [ENTER/YES] to proceed with the cancellation or
[EXIT/NO] to abort the whole procedure and return to display of the EDIT menu.
As for the other Edit functions, if you go ahead with the modification, the display will show a
confirmation prompt:
Pressing again [ENTER/YES] the system will procede with the change and the save on the disk
showing on the display:
