105
Viscount Concerto III - Operating Manual
7.2 SELECTING THE TYPE OF REVERB
The Concerto III provides a choice of eight types of reverb, allowing perfect adaptation of the
organ’s sound to the room in which it is being played. As described in chap. 2, the [REVERB]
slider on the central panel allows the level of the reverb to be adjusted.
To set the type of ambient effect required, select the REVERBERATION field in the SET-UP menu
and press [ENTER/YES] the following video page will be displayed:
Use the encoder to select the type of reverb and press [EXIT/NO] to save the selection and return to
display of the SET-UP menu.
N.B.:
The reverb selection only affects the church organ voices.
7.3 SETTING THE EQUALIZER
The Concerto III has its own internal graphic five-band equalizer allowing optimal setting of the
character of the sound generated by the organ. To display the setting video page, select the
EQUALIZER field in the SET-UP menu and press [ENTER/YES]:
As can be seen, the top of the video page contains the central frequencies of the five bands on
which the equalizer operates. The bottom line allows regulation of the attenuation (negative values)
or enhancement (positive values) of the signal in a range of +/- 12 dB.
Here again, after making the settings you require, press the [EXIT/NO] button to save the
modifications and return to display of the SET-UP menu.
N.B.:
The equalizer only affects the church organ voices and not the Orchestra voices.
