EN - 16
viscount
User Manual
6.1 SELECTING THE VELOCITY CURVE
The keyboard of
Cantorum VI Plus
is touch sensitive. It is also possible to choose one of the three key
velocity curves available or four fixed values that will influence the response to the sound of orchestral
voices and MIDI notes.
To select the desired velocity curve, follow this procedure:
1.
Holding down the [SET] button press the [REC] button: all LEDs on the panel flash twice.
2.
One of the LEDs of the [TRANSPOSER] button lights up indicating the curve currently selected
in this order (left to right): Soft, Normal, Hard, Fixed at 32, Fixed at 64, Fixed at 96, Fixed at 127.
3.
Select one of the options by repeatedly pressing [TRANSPOSER].
4.
Press the [REC] button to complete and store the operation.
6.2 RESETTING THE FACTORY SETTINGS AND SONGS
The instrument provides various ways of restoring the factory data which are present at the time of
purchase. It is possible to restore:
-
Only the instrument settings (combinations, Split point, Ensemble, intonation, voices volumes,
tremolo, orchestral voices, Local Off, MIDI settings, general settings).
-
Only factory songs.
-
The instrument settings and the factory songs.
To recall a recovery operation:
1.
Holding down the [SET] button press the [REC] button: all LEDs on the panel flash twice.
2.
Holding down the [SET] button,
-
To reset only the instrument settings
, press and hold the [2] button of the combinations
until all panel LEDs turn off and the instrument goes into Stand-By.
-
To reset only the factory songs
, press and hold the [3] button of the combinations until
the LED of the combination LED flashes once.
-
To reset both instrument settings and factory songs
, press and hold the [4]
combination button until all panel LEDs turn off and the instrument goes into Stand-By.
3.
Press the [REC] button to return to normal operation.
6. GENERAL INSTRUMENT SETTINGS
N.B.
Organ registers are not subject to key velocity.
