EN - 6
viscount
User Manual
2.2 REAR PANEL
1.
[POWER ON] switch:
switches the
Cantorum VI Plus
on and off.
2.
[AC INPUT] socket:
connector for the power cable supplied with the instrument.
3.
[MIDI] connectors:
connectors for connecting MIDI devices.
-
[IN]:
input connector for receiving data from an external MIDI unit to the
Cantorum VI Plus
.
Connect to the MIDI output of the transmitting device (e. g. a sequencer).
-
[OUT]:
this connector transmits the MIDI data generated by
Cantorum VI Plus
. Connect to
the MIDI input of the receiving device (e. g. an expander).
4.
[PEDAL] connectors:
connectors for connecting pedals.
-
[EXPR]:
Connector for the expression pedal, to continuously control the instrument volume.
-
[SUSTAIN]:
Connector for a switch-type pedal to control the Sustain effect for orchestral
voices.
5.
[USB] connectors:
-
[ ]:
insert the USB stick you want to use into this connector.
-
[TO HOST]:
connector for transmitting and receiving MIDI data with a computer.
6.
[OUT] connectors:
line outputs for connection to external audio devices (powered speakers, mixers,
amplifiers), in which the instrument's general signal is present.
In case of stereo system, connect the [L/Mono] output to the left channel and the [RIGHT] output to
the right channel. If a monophonic system is used, only connect the[L/Mono] connector.
7.
[PHONES] connector:
Jack connector for connecting stereo headphones. The internal speakers are
turned off when the headset is connected.
1
2
3
4
5
6
7