30
3. Connect the Headset or Desk Microphone
If using a headset:
Connect the headset to the jack labeled
HEADSET
on the front of the Mini Console.
If using a desk microphone:
Plug the desk microphone cable into the jack labeled
MIC-B
on the rear of the Mini
Console. Note that if using a desk microphone in a room other than the control room
where the 94A-07 console and its speakers are located, you will need to install an
additional communication speaker. This speaker will daisy chain off the control room
communication speaker. Contact Vis-A-Vis at 800-319-6014 or by email at support@
vitalinq.com to discuss your specific requirements.
Miscellaneous
• Although there is a built-in microphone on the Mini Console (labeled
MIC-A
), in most en-
vironments, using a headset or desk microphone will provide better sound.
• The jack labeled
AUX
on the front of the Mini Console is used for testing by
the manufacturer.
• The RCA jack labeled
AUX
on the rear of the Mini Console can be used for a heart rate
monitor.
• The jack labeled
BLACK OUT
on the rear of the Mini Console can be used to attach an ad-
ditional Mini Console. Up to four Mini Consoles can be run in series.
• If you are interested in connecting a heart rate monitor or running Mini Consoles in series,
contact Vis-A-Vis at 800-319-6014 or by email at [email protected] to discuss your
specific requirements.
7.2.3 Operation
Headset
1. Adjust the talk volume for the headset using the small rotary pot labeled
TALK
on the front
of the Mini Console.
2. Adjust the listen volume for the headset using the large knob labeled
LISTEN
on the front
of the Mini Console.
3. Toggle the in-line mute switch located between the headset cord and coil cord to mute the
headset microphone.
Desk Microphone:
1. The talk volume for the desk microphone can be adjusted using the small rotary pot labeled
TALK
on the rear of the Mini Console.
2. The listen volume for the communication speaker is adjusted using the knob labeled
LISTEN VOLUME
on the 94A-07 console.
