27
6.4.2 Rear of console
• If using a desk microphone, plug it into either the jack marked
DESK MIC OR RIGHT
FOOT SWITCH
or the jack marked
DESK MIC OR LEFT FOOT SWITCH.
• Plug the white Procedure room Ethernet cable into the jack marked
LAB WHITE
.
• Plug the blue Control room Ethernet cable into the jack marked
TEK BLUE
.
• If using an optional headset foot switch instead of the supplied in-line mute switch, plug it
into the foot switch jack on the
SAME
side that you plugged in the headset. For instance,
if using the
LEFT HEADSET JACK
, plug the foot switch into the jack labeled
DESK MIC
OR LEFT FOOT SWITCH
.
• Connect the male BNC connector on the coaxial cable from the monitor microphone to the
BNC connector on the console labeled
LAB MIC
.
• The jacks marked
BLACK
,
YELLOW
and
SILVER
are used for optional equipment. In-
structions for using these jacks are included with the equipment. See OPTIONAL EQUIP-
MENT section at the end of this document.
• The
ANT
jack is provided for using an external FM antenna in weak reception areas. This
antenna is not supplied by Vis-A-Vis.
• Plug the three conductor power cable
into the
POWER
jack
. Don’t plug it in to an AC power
outlet yet.
Proceed to Section 2: “Setting up the VITALINQ™ system”
YELLOW
BLACK
HEAD
SET
TALK
VITALINQ
94A-07
SECURITY
CABLE
LAB
MIC
ANT
NO USER SERVICEABLE PARTS INSIDE.
FOR SERVICE CALL 1-800-319-6014
OR EMAIL [email protected]
SILVER
REAR OF CONSOLE
COLOR OF TEXT TO BE:
PROCESS BLUE
1/8
1/4
1/2
1
2
