9
The following items can be set depending on the source and setting:
GENERAL
LANGUAGE
Changes the display language: “English”, “Spanish”.
DEMO
(demonstration)
Activates the demonstation: “ON”, “OFF”.
CLOCK-ADJ
(clock adjust)
TUNER-STP:
NOT USED
CAUT ALM:
NOT USED
BEEP
Activates the beep sound: “ON,” “OFF”.
AUTO OFF
Shuts off automatically after a desired time when
the unit is turned off: “ON,” (30 minutes), “OFF”.
USB MODE
Changes the USB mode: “ANDROID”, “MSC/MTP”
(Available on ly when the USB source is selected.)
CT
(clock time)
Activiates the CT function: “ON”, “OFF”.
BTM:
NOT USED
SOUND
EQ10 PRESET
Selects an equalizer curve from 10 Equalizer curves
or off:
“OFF”, “R AND B”, “ROCK”, “POP”, “HIP-HOP”,
“ELECTRONICA”, “JAZZ”, “REGUETON”,
“SALSA”, “KARAOKE”, “CUSTOM”, “OFF”.
The equalizer curve setting can be memorized for
each source.
EQ10 CUSTOM
Sets [CUSTOM] of EQ10.
Setting the equalizer curve: [BAND1] 32
Hz, [BAND2] 63 Hz, [BAND3] 125 Hz,
[BAND4] 250 Hz, [BAND5] 500 Hz,
[BAND6] 1 kHz, [BAND7] 2 kHz, [BAND8] 4
kHz, [BAND9] 8 kHz, [BAND10] 16 kHz.
The volume level is adjustable in 1 dB
steps, from -6 dB to +6 dB.
BALANCE
Adjusts the sound balance: “RIGHT-15”–
“CENTER” – “LEFT-15”.
FADER
Adjusts the relative level between rooms:
“FRONT-15” – “CENTER” – “REAR-15”.
S. WOOFER
(Subwoofer Level)
- NOT USED
HPF FREQ
(high pass filter frequency)
Selects the front/rear speaker cut-off
frequency: [OFF], [80Hz], [100Hz], [120Hz].
AUX VOL
(AUX Volume Level)
Adjusts the volume level for each connected
auxiliary equipment: “+18dB” – “0 dB” – “-8 dB”.
This setting negates the need to adjust the volume
level between sources. Available only in AUX mode.
DISPLAY
BLK OUT (black out)
Turns off the illumination automatically if no
operation is performed for 5 seconds when any
source is selected: [ON], [OFF].
To turn the light back on, press any button on the
unit.
DIMMER
Changes the display brightness; “ON”, “OFF”.
BRIGHTNESS
Adjusts the display brightness. The
brightness level is adjustable: [1] – [10].
BUTTON-C (button color)
Sets a preset color or customized color for
the buttons.
DSPL-C (display color)
Sets a preset color or customized color for
the display.
SND SYNC (sound synchronization)
Activates the synchronization of the
illumination with the sound: [ON], [OFF].
