26
6.4
Installing the Vitalinq™ console
6.4.1 Front of Console
Plug the headset into a headset jack on the front of the console closest to the operator’s normal
working location. If you will also be using a desk microphone,
make sure that it is NOT
plugged in on the same side as the headset
. See next section.
Note:
The Console is usually placed on the control room counter top near the operator. If this is
not possible, it may be placed in another location convenient for operation of music controls
and if necessary, an optional remote console (MC-11 Mini Console) can be purchased for
the headset (and foot switch if one is used) so they can be located within reach of the control
room operator or even in another room. See section titled OPTIONAL EQUIPMENT at the
end of this document.
Contact Vis-A-Vis at 800-319-6014 or email [email protected] to learn more about
this option.
V
I
T
A
L
I
N
Q
V
I
S
-
A
-
V
I
S
A
SET
TO 3,
LOCK DESK MIC IN TALK MODE, HOLD
IN, ADJUST
UNTIL FEEDBACK JUST STOPS, THEN RELEASE
by
COLOR OF
TEXT TO BE:
PROCESS BLUE
FRONT OF CONSOLE
V
I
T
A
L
I
N
Q
V
I
S
-
A
-
V
I
S
by
1/8
1/4
1/2
1
2
