PROGRAMMING SETTINGS
™
RELOAD INDICATOR ALARM
//
This setting allows you to adjust the speaker alarm for the Reload Indicator. Regardless of what this is setting
is set to, the Reload Alarm is muted by default. To turn on or to mute the speaker, while the Spire is on, simply
hold in the Force Feed button for 2 seconds. The Spire will beep the number of times the Reload Indicator
Alarm is set to confirm you have turned on the Speaker. The Spire III will remember your setting next time you
turn on the Spire.
Setting 1
is OFF. The Spire III will not beep when the Reload Indicator activates.
Setting 2
is ON and will beep quickly beep 2 times when the Reload Indicator activates.
Setting 3
is ON and will beep quickly beep 3 times when the Reload Indicator activates.
Setting 4
is ON and will beep quickly beep 4 times when the Reload Indicator activates.
The programming menu can be accessed by turning the Spire III ON while holding in the Force
Feed/Programming button on the bottom of Spire III and then releasing the Programming button. The LED will
cycle through a rainbow of colors. The LED will stop on purple indicating you are now in the first programming
setting.
Tapping the Programming button will toggle through the different programming settings. When the LED is lit
for the setting you wish to adjust press and hold the Programming button until the LED begins to flash, and
then let go. The LED will flash the number of times you want the new value to be set to. After you have set the
new value, the LED will flash the number of times you have entered and then flash the rainbow of colors,
returning to the color you have adjusted indicating that the new value has been saved. To exit the program-
ming mode turn the Spire III off by pressing the on/off button.
MANUAL
//
PAGE 7
PURPLE
VALUES 1-4
/
Default 2
