BATTERIES
+
OPERATION
™
LENGTH:
9.5”
WIDTH:
4”
HEIGHT:
3.9”
WEIGHT:
16oz
CAPACITY:
230 balls
BATTERIES:
3 x AA
The Spire III™ uses
3 AA
batteries. To install them follow these steps:
1
Open top shell by pressing unlock button on the back
2
Remove Spire tray from shell by pinching the tray release tab between your thumb and forefinger
and pulling the tray up.
3
Open Velcro strip covering the battery slots and insert 3 AA sized batteries. Follow the markings
on the bottom of the battery holder for correct polarity alignment. Tighten Velcro over the batteries
to ensure they don’t come loose during playing. Use high quality alkaline or lithium ion
batteries. Using rechargeable batteries is not recommended and will cause performance issues.
4
Insert Spire tray back into the loader and push down until black lock clicks into locked position.
5
Close top shell by pushing it down until it locks in place.
BATTERY INSTALLATION
//
SOUND
//
By default, the Spire III is muted. To turn on the speaker, with the Spire on, simply hold in the Force Feed
button for 2 seconds. The Spire will beep the number of times the Reload Indicator Alarm is set to confirm you
have turned on the Speaker. To mute the speaker, follow the same procedure and hold in the Force Feed
button. The Spire III will remember your setting next time you turn on the Spire.
MANUAL
//
PAGE 2
