Virtue SPIRE III Скачать руководство пользователя страница 2

SPIRE III  SETUP

 

Thank you for purchasing the Virtue Spire III™ paintball loader. 

This manual covers all aspects of your Spire 

III loader. It is recommended you read the whole manual as it contains important product and safety informa-

tion.

QUICK SETUP

 

//

To start using the Spire III ™ immediately install 3 AA batteries. The LED 

indicator shows the following information during normal operation.

   

 

BLUE

, loaded and ready.

   

 

RED

, not loaded, add paintballs.

   

 

YELLOW

 during startup, low battery. 

 

 
   

 

GREEN

 blinking once every 2.5 seconds is in power save mode.

When your Spire III starts with low batteries, it will automatically enter the power 

save mode until fresh batteries are installed. Power save mode prolongs battery 

life by shutting down Reload Indicator and LEDs. The LED will occasionally  

flash green to let you know it's on.

LENGTH:      

 9.5” 

WIDTH:         

4”

 

HEIGHT:        

3.9”

 

WEIGHT:    

   16oz

             

CAPACITY:   

230 balls

BATTERIES:   

3 x AA

It is recommended to download the Spire III App from the 

Google Play Store or Apple App Store and download the latest 

firmware settings to your Spire III. Many exciting features will 

be added to the App in the future.

SPEC

 

//

 

WARNINGS

 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

 

* Always wear eye protection specifically designed for paintball.

 

* Persons under 18 years of age should have adult supervision   

 

   when using this product.

 

* Only use projectiles designed for the sport of paintball such as  

 

   paintballs or Reballs™.

 

* Misuse of paintball equipment can cause serious injury or death.

MANUAL

 

 

//

  PAGE 1

SEE PROGRAMMING SECTION FOR ADDITIONAL SETTINGS

Содержание SPIRE III















Отзывы: